Get Crafty And Make Some Unique Candle Holders – 50 Concepts For A Ideal Weekend UndertakingDaily Interior Design Ideas

Candles have been around for ages. In fact, the earliest known candles originated in China around 200 BC. They then appeared in Europe after 400 AD. The first candles were made of natural fat and wax and later on oil was used. Paraffin revolutionized candle-making in 1830. Originally, candles were commonly used for illumination and, although we now have electricity, we still keep candles in the house but mainly as decorative features and for mood lighting. Now you can make your own candles.

MASON JAR CANDLES.

Masonjars are great for thistype of project. You can make lots of interesting candle centerpiecesusing them. For example, these floating candles have a lovely rusticlook and they would look great on a table. You can even use them as centerpieces for a wedding.

To make the jar look more interesting, a nice idea can be to paint it with chalkboard paint. You can also personalize it like in this case for example. Cut out a heart out of tape or something that sticks to the jar and paint everything but that area. Then peel off the heart and you’ll get this lovely design.{found on heartloveweddings}.

This project is similar to the very first one we’ve presented here. In this case, however, we have table lanterns instead of floating candles. The jars are placed upside down and the candles are attached to the lid.{found on simplykierste}.

Recycle lave fabric and old jars and make something elegant and beautiful. First measure the jar and decide how much lace you need to wrap around. Then glue it on the jar at the ends and wrap some twine around as well. The candles go inside.{found on flickr}.

You can also make lanterns using oil and mason jars. Just make a hole in the center of the lid for the wick to go through, put some oil inside the jar and there you have it: a very nice piece for the outdoors. Use it on the terrace.

CONCRETE CANDLE HOLDERS.

Although concrete may seem like a material difficult to work with, you can use it to make all sorts of cuteprojects. For example, try making some concrete candle holders. It’s much easier than you may think. Make these using cement powder, paper cups, coins, petroleum jelly, sticker tape and disposable containers.{found on sayyes}.

There are simpler projects for you to try as well. For example, this candle holder can hold 4 candles. It’s basically a block of cement with holes in it large enough to fit candles inside. To make it you need a baking pan, concrete mix and candles. Pour the concrete into the mold and then add the candles, wait for the concrete to solidify, burn out the candles and remove the wax.{found on signepling}.

There are lots of interesting other designs you can try. You can basically choose any shape you want for the votives and candle holders. You just have to figure out how to make the mold or simply to find containers with the shape and size you desire.{found on nimidesign}.

Because concrete is not exactly a delicate material, this gives you the opportunity to make candle holders with a more rough design if you want them to look more organic. The lines don’t have to be perfect. In fact, any discrepancies will only make the piece look unique.{found on site}.

You could use a soda can as a mold. First, cut the top off. Add a small amount of water into the can, then add a cup of concrete and stir. Continue to add concrete and water. Shake the mold gently to make sure it evens out. Place the candle on top of the concrete and press down. Shake the mix evenly around the candle. Let it dry overnight and then remove the can.{found on oncewed}.

For this project all you need is a milk carton, tape and concrete. Cut out the top of the milk carton and then cut along the long side to make a box with a flap lid. Cut out 4 holes in the lid for the candles. Fill the mold with wet concrete and use masking tape to secure it and to make sure it maintains straight lines. Insert the candles through the holes and let the concrete dry.{found on chezlarsson}.

Another thing you can use as a mold is the bottom portion of a plastic bottle. Cut the bottle. It doesn’t have to look perfect. Then simply pour the concrete into the mold, shake a little bit and insert a candle in the center. Let it dry and remove the mold.

To give the votives a more interesting look, you could paint them. These, for example, were made using the technique we’ve just describes. The bottom portion is painted with metallic paint. You can simply dip them in paint and wait for the paint to dry.{found on monsterscircus}.

These interesting-looking candle holders also have lids. You’ll basically have to use two molds for one candle holder. In one of them you’ll insert the candle and the other one will be the lid. It can have any shape you want and you can create all sorts of interesting combinations.{found on site}.

WOOD VOTIVES.

If you prefer a material with a warm touch and of a different consistency, try using wood. Although technically wood can easily burn and it’s a not great idea to put close to fire, it can also look very elegant and beautiful in a décor. This candle holder is basically just a block of wood with 5 small holes for 5 candles.{found on houzz}.

This candle holder also has a compact design. It’s a big slice of wood with three large holes in it. In each hole there’s room for a candle votive. Because the candles stay inside the votives, there’s no danger of setting fire to the whole house.{found on site}.

If you like the organic and natural look of wood logs, then why not use big pieces to make some rustic-looking candle holders. These have a sculptural look and they make quite an impression.

You know those small candles that usually go on birthday cakes? Well they can also look nice ona mantel and even on a table. Make some cute little candle holders like these wooden cubes and drill a hole in each one big enough for the candles.{found on hankandhunt}.

Take advantage of what nature has to offer and find yourself a gorgeous log. It should have an interesting shape. Clean it, sand it down and then drill some holes in it for the candles. This one is a cyprus wood piece.{found on etsy}.

This project is similar to one we’re presented above, the difference being that this slice of wood is thinner. The project is very simple. Take the wood slab and make holes in it big enough for the candles to fit in. you can then use it as a table centerpiece for a romantic dinner.{found on brit}.

When it comes to wood, the finish doesn’t have to be perfect. Each piece of wood is different so anything you’ll be making out of it will be unique. For a more rustic look, try using salvages wood.{found on alamodestuffblog}.

We’ve showed you lots of candle holders made of tree logs. This one is similar in this sense but, at the same time, it’s quite different. In this case, the log was sliced in half vertically so it sits flat on the table with the bark covering its entire surface.{found on site}.

CANDLE HOLDERS MADE OF PIPES.

Try a design with an industrialfeel if you think it would look good in your home. For example, a nice accent piece can be a candle holder made of copper pipes. Try combining the pieces in such a way to create a sturdy design with a good base and an interesting shape.{found on anmagritt}.

You can also combinematerials and finishes. This candle holder, for example, is made of copper pipes and has a base made from a piece of wood. The pipes have the perfect diameter for the candles to fit inside.{found on adailysomething}.

This candle holder is made of black iron pipes and fittings. It has a symmetrical design, with a sturdy base and a simple shape. Such a piece would look very nice of the fireplace mantel or in the center of the dining table.{found on etsy}.

If you prefer something simpler, a project that takes less time to complete, try this one. It’s a copper candle holder. All you need for this project is some thin copper coil which you bend in a shape you like. You can experiment and try several designs until you find the one you like best.{found on amerrymishapblog}.

GLASSES AND BOTTLES.

A glass, provided it has the right dimensions, can be a wonderful votive. But you might want to personalize it a little. You could, for example, use twisted sisal and wrap it around the base of the glass just to give the candle holder a rustic look.{found on site}.

Here’s something you probably never thought of: you can make a candle holder out of a beer bottle. Cut the top portion of the bottle carefully and attach it to the bottom. This way you’ll create an interesting base for the candle holder. Then simply place the candle inside.{found on etsy}.

If you want to try something a little more flashy, you could use glitter. Take an empty glass that you like, apply some glue on the inside and then pour glitter over it. The glitter will stik to the glue. Allow it to dry and you have a candle holder.{found on houseofearnest}.

This is a wine bottle turned into a candle holder/lamp. To make something similar you’ll have to cut out the bottom of the bottle. Then find something to use as a base, such as this one made of wood. The base has vent holes for proper air flow.{found on etsy}.

Give the glass a mirrored look to make it more interesting. You can use silver leaf for that. Also, if the glass has a certain design on it, it will look more interesting. You can personalize the glass with monograms or other types of designs.{found on ruffledblog}.

Here’s an interesting idea for some table centerpieces. Get some empty glass bottles. They can be of different sizes and shapes. Get some paint and a paintbrush and paint numbers on each one. Then stick a candle inside. Make sure it has the right diameter. You can also tie some twine or cord around the bottle to make it look more interesting.

WRAPPED DESIGNS.

Want to make something interesting for Christmas while you’re sitting around watching a movie? Why not make a snugly sweater for your candle votives? You need some yarn and a double crochet. The design or pattern you choose to use is up to you but this one looks pretty good.{found on site}.

Add a rustic touch to your home’s décor with these DIY twig votives. To make them you need glass votives, votive candles, twigs, spray paint and a hot glue gun. First spray paint the twigs and then start gluing them one by one to the votives.{found on freutcake}.

As you probably know, washi tape is incredibly versatile and fun to work with. You can decorate with it lots of things, including candle votives. Pick some patterns and prints you like and get to work. Be creative and come up with your own designs.{found on site}.

Here’s a candle holder with a very simple but very chic design. It’s basically just some rope wrapped around a tape cardboard core. To make something similar you need jute rope, twine, paper tape and hot glue.{found on mintedstrawberry}.

These glass cylinder votives have bark wrapped around them. It’s an interesting idea and also one very easy to execute. You need a glass vase, thread, glue and birch bark. You can then place the candles on a wood slice to make a rustic centerpiece.{found on etsy}.

If you want, you can try something a little more fresh such as this lovely ornament. It’s a candle inside a glass votive, with small fresh flowers held by twine. They cover the entire exterior of the votive and give it a very lovely look. Also, the flowers smell nice.

Here’s a project you can customize to your preferences. These are lanterns made using some glass jars and paper snowflakes which wrap around the jar. You can pick a theme and replace the snowflakes with anything else you like. Glue the cut outs to the jar and light up the candle.{found on michelemademe}.

OTHER DESIGNS.

There are lots of other great ideas you can use which don’t exactly fit into any of the categories. For example, how about these candle holders made of antler sheds? They’re definitely very interesting. You can make something similar. You need 2 copper bushings, 2 copper caps, 2 antler sheds and 2 candles.{found on adailysomething}.

This antler candle holder has a sculptural design and it stands out, not just because of the shape but also because of the color. It has neon accents and it looks great. To achieve such a look, take some tape and delimit the area you need to be painted, then dip the antler in the paint of your choosing.{found on kristimurphy}.

Try modeling your own candle holders using clay. To make these ones you need a rolling pin, taper candles, a pizza cutter, a wine cork or something similar in size and modeling clay. It can be a fun project for the weekend.{found on oncewed}.

These stenciled burlap candle holders reveal their true beauty in the dark. In case you want to make some, here are the supplies you’ll need: cardstock or stencils, burlap, glass candle holders, tape, acrylic paint, glitter and thread to match the burlap.{found on justcraftyenough}.

Want to make something fun for the kids’ birthday? Here’s an idea: dinosaur candle holders. You need a bunch of dinosaur toys and some candles and candle holders which you can stick into the toys and secure with glue.{found on etsy}.

You can basically re-purpose any item in which you can fit a candle into a candle holder. For example, these candle holders look like fuse holders or something similar. They’re interesting and they offer lots of inspiration.{found on pikkuvarpunen}.

These candle holders are even more unusual. They appear to be some old ladles and they would look very nice in a kitchen where they would add some rustic charm to the décor.

Here’s an interesting idea for Halloween. Take a small pumpkin, make a hole and remove what you find inside. Then cover the pumpkin with glue and cover it with glitter. Let it dry and add the candle inside. You can simplify your work by using a drill to make the hole. It should be slightly bigger than the candle.{found on twigandthistle}.

Shaker containers make great candle holders because they have holes in their lids. So all you have to do in put a candle in a shaker and then make a hanger using wire. After that, you’ll have a lovely little lantern you can hang in a tree.{found on thehomelessfinch}.

These tin luminaries are quite easy to make. You need empty tin cans, a nail, a hammer and some spray paint. First fill the cans with water and put them in the freezer. Then use a template to punch holes into the tin can. Remove the ice, spray paint the can and put a candle inside.{found on celebrations}.

« Sink Designs Suitable For Small BathroomsBar Stools: 24 Ways to Find your Match »Published by Simona Ganea in Best Of, on February 28th, 2014

Invisible BookendsDaily Interior Design Ideas

Turn discarded books into invisible bookends for a streamlined bookshelf display.Bookends are a great way to add a bit of style to your bookshelf, but what about when you don’t really have room for a big ol’ bookend? Or maybe you just want to keep things simple on your bookshelf. I had that problem recently. I needed a way to keep my booksstanding up at the end of the shelf, but didn’t want to clutter things up with bookends, or ugly them up with thin metal bookends like the ones you see at the library. I just wanted my pretty books to shine in all their glory.

Then the thought occurred to me— Why not turn a pretty, forgotten bookfrom the thrift store into a bookend, solving all my bookshelf problems? It’s the perfect thin shape, looks great, and is a nice way to give new life to a damaged or discarded book.

Turn discarded books into invisible bookends for a streamlined bookshelf display.See? No, you don’t see, do you? That’s because my bookends are practically invisible! They blend right into their environment while adding a bit of classic style to the ends of my bookshelf. A wonderful solution. Check out how easy they are to make!

Turn discarded books into invisible bookends for a streamlined bookshelf display.Supplies (for two bookends):
-2 books with 1″ spines
-2 thin metal bookends (I used these)
-1×6 board or a board of another dimension to fit your book (see notes below)
-super glue (I used gorilla glue)
-clamps
-craft blade

Selecting Your Book and Lumber Size: My books measured about 5.75″ deep, 8.25″ high, and 1″ thick. It’s important to find a book depth that will correspond with lumber standard widths, so you don’t have to do any unnecessary cutting of the lumber later. This is why I used a book with a 1″ spine. I used a 1×6 board to fill the inside of my book, which really measures .75″ x 5.75″. This board fit my book dimensions perfectly! How did I know that would happen? Well, I brought my book spine to the lumber yard with me! There’s a first time for everything.

If you can’t find 1″ thick books and need to fill out the inside of your book more, you can also find thinner sheets of lumber below the standard lumber sizes at places like Lowe’s. Just stack and glue the boards to your desired thickness.

Turn discarded books into invisible bookends for a streamlined bookshelf display.Step One: Use a sharp craft blade or razor to cut away the contents of the book from its spine.

Feel free to read the contents later! Or discard the pages as I did. I was able to do this guilt-free, because I found my book at the thrift store and figured it was unloved and needed a new life.

Turn discarded books into invisible bookends for a streamlined bookshelf display.Step Two: Wrap the book spine around your lumber to mark where to cut the lumber. I left about a 1/8″ gap at the top to achieve a more realistic book effect.

Step Three: Cut the board to the length you marked. If you don’t have a saw at home, you can do this at the lumber yard. They will make cuts for you for free.

Turn discarded books into invisible bookends for a streamlined bookshelf display.Step Four:Cover the wooden blocks and metal bookends with moderate amounts of Gorilla Glue, as shown above. Don’t get too close to the edges or it will seep out. Gorilla Glue foams and expands as it’s clamped, which makes for a strong hold, but a messy final product if you’re not careful when applying the glue.

Step Five: Once everything is all glued into place, use clamps to press it all together as the glue sets up. You should use scrap lumber as a buffer between the book and the clamps or the clamps will leave indents in your book. I made the mistake of not doing this, and got some pretty visible denting, especially on my orange book. Thankfully the dents aren’t noticeable on my shelves. Whew!

Turn discarded books into invisible bookends for a streamlined bookshelf display.Here are my invisible bookends in action. It’s as if my books are saying, “Look, Ma! No hands!” -Mandi

Credits // Author and Photography: Mandi Johnson. Photos edited with Stella from the Signature Collection.

Bookends are a great way to add a bit of style to your bookshelf, but what about when you don’t really have room for a big ol’ bookend? Or maybe you just want to keep things simple on your bookshelf. I had that problem recently. I needed a way to keep my books standing up at the end of the shelf, but didn’t want to clutter things up with bookends, or ugly them up with thin metal bookends like the ones you see at the library. I just wanted my pretty books to shine in all their glory.

Then the thought occurred to me— Why not turn a pretty, forgotten book from the thrift store into a bookend, solving all my bookshelf problems? It’s the perfect thin shape, looks great, and is a nice way to give new life to a damaged or discarded book.

See? No, you don’t see, do you? That’s because my bookends are practically invisible! They blend right into their environment while adding a bit of classic style to the ends of my bookshelf. A wonderful solution. Check out how easy they are to make!

Supplies (for two bookends):
-2 books with 1″ spines
-2 thin metal bookends (I used these)
-1×6 board or a board of another dimension to fit your book (see notes below)
-super glue (I used gorilla glue)
-clamps
-craft blade

Selecting Your Book and Lumber Size: My books measured about 5.75″ deep, 8.25″ high, and 1″ thick. It’s important to find a book depth that will correspond with lumber standard widths, so you don’t have to do any unnecessary cutting of the lumber later. This is why I used a book with a 1″ spine. I used a 1×6 board to fill the inside of my book, which really measures .75″ x 5.75″. This board fit my book dimensions perfectly! How did I know that would happen? Well, I brought my book spine to the lumber yard with me! There’s a first time for everything.

If you can’t find 1″ thick books and need to fill out the inside of your book more, you can also find thinner sheets of lumber below the standard lumber sizes at places like Lowe’s. Just stack and glue the boards to your desired thickness.

Step One: Use a sharp craft blade or razor to cut away the contents of the book from its spine.

Feel free to read the contents later! Or discard the pages as I did. I was able to do this guilt-free, because I found my book at the thrift store and figured it was unloved and needed a new life.

Step Two: Wrap the book spine around your lumber to mark where to cut the lumber. I left about a 1/8″ gap at the top to achieve a more realistic book effect.

Step Three: Cut the board to the length you marked. If you don’t have a saw at home, you can do this at the lumber yard. They will make cuts for you for free.

Step Four: Cover the wooden blocks and metal bookends with moderate amounts of Gorilla Glue, as shown above. Don’t get too close to the edges or it will seep out. Gorilla Glue foams and expands as it’s clamped, which makes for a strong hold, but a messy final product if you’re not careful when applying the glue.

Step Five: Once everything is all glued into place, use clamps to press it all together as the glue sets up. You should use scrap lumber as a buffer between the book and the clamps or the clamps will leave indents in your book. I made the mistake of not doing this, and got some pretty visible denting, especially on my orange book. Thankfully the dents aren’t noticeable on my shelves. Whew!

Here are my invisible bookends in action. It’s as if my books are saying, “Look, Ma! No hands!” -Mandi

Credits // Author and Photography: Mandi Johnson. Photos edited with Stella from the Signature Collection.

Conserving Area Turns into All-natural With Vertical StorageDaily Interior Design Ideas

Verticalstorage is at the leading of my list of issues I want to have in my property when I move in. That is due to the fact I locate it extremely cost-effective and useful. Theoretically, it’s not that a lot different to have a vertical drawer rather of a horizontal one particular but you’ll see that it’s significantly less complicated to match vertical storage in the space, no matter its function.

In the kitchen, vertical racks are ideal for storing and organizing spices and other factors. They considertinyroom and they effortlessly fit in the kitchen island or wallcabinets.

Vertical storage is not just for tiny objects. You could, for illustration, shop your bikes on the wall and they’ll get tiny room and occupy no floor room. It’s even more economical when you have a lot more than one particular bike.

This variety of bookcase is a single of my favorites. It is tall and sleek, will take really tiny floor space and it can very easily fit in the corner of a space. Also, you can organize the booksinto categories on the shelves just like you would on a horizontal shelf or even far better.

The kitchen can never ever be also spacious and there can in no way be also much storage space. For items like decorative vases, jars or cups, you can generate particular storage compartments all around the doorframe.

Vertical storage is undoubtedly extremely useful and practical in the bathroom in which there are lots of issues that need to be stored or displayed and usually not so considerably space. You can typically find the space for a vertical storage unit like this one, whether it’s by the tub or somewhere else.

Wine racks and vertical storage go hand in hand. There are tons of spacesexactly where you could fit such a wine rack and not necessarily in the kitchen. The dining room or even the residing room are also goood spaces for such a feature.

Slanted ceilingsdon’t normally let you use the walls for storage but you can come up with custom designs like in this situation. There’s lots of room there for a massive bookcase, some show shelves and even an aquarium.

Here’s yet another clever and area-conserving storage thought for the bathroom. It’s a program which seems very equivalent to a ladder but it has shelves which are wonderful for storing towels, bath salts and all kinds of other factors.

Be practical and make room for further storage in your closet. Theseopen shelves are excellent as they really do not occupy a great deal of area and they allow you retailer and organize a great deal of things in baskets and boxes.

The living is also an area in which storage can be a dilemma. Right here we have a quite clever and interestingmethod for storing firewood for the fireplace. It looks good and it does not consider up a whole lot of area given that it is a niche in the wall.

Picture sources: 1, 2, 3, four, five, six, 7, 8 and 9.

« 35 Light And Fashionable Scandinavian Residing Area DesignsPublished by Simona Ganea in Furnishings, on February 13th, 2014

How You Can Incorporate Wine Racks Into Your Layout With Out Wasting AreaDaily Interior Design Ideas

Whether you’re a wine connaisseur or not, it’s always good to have a bottle or two in the home. But the place do you preserve them? Properly clearly a wine rack would certainly be beneficial. Lots of individuals appear to think that a wine rack is just an accessory and that it takes up space that can be employed for anything else. But there are methods in which you can incorporate wine racks into your interior layout without having wasting any area.

living room wine storage glass doors How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

Dependent on in which you want to shop and display the wine bottles, you can figure out remedies. For illustration, if you want to have the bottles in the kitchen, then take a seem close to and see in which you could spare some space.

kitchen backsplash wine storage How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

For instance, perhaps you have some area in the corner or perhaps you’re not using all the area accessible in your kitchen island. The cabinets are also an option. Maybe there is some space there or perhaps you can squeeze a vertical drawer somewhere.

idea for wine celar How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

Yet another alternative is to retailer the bottles in the dining because you’ll most very likely be utilizing them there. Right here issues are not that simple but there are nevertheless plenty of alternatives.

attic wine taste room How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

You could have a wall-mounted wine rack on one particular of the walls. There are lots of styles which get up quite minor area and which also appear wonderful. If the dining room is out of the question as effectively, then flip your consideration to other spaces. Really don’t overlook anything at all. You will absolutely locate a resolution so just be imaginative and open-minded.

Constructed in racks.

buil in kitchen wine storage How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

Due to the fact the compartments are so little, this is a fantastic room-conserving thought

above fridge wine storage How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

The space above the refrigerator is usually not utilised for anything so consider benefit of that

books and white kitchen storage How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

You can try out to locate some space on the wall, as an extension of the cabinets

clever wine or bottle storage How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

You can even shop your wine bottle inside the wall itself

built in kitchen furniture wine storage How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

Stack the compartments vertically and you will certainly locate some room for them

A developed-in wine rack doesn’t get up much room, particularly considering that you can include in locations which would normally continue to be empty. So make some room in the kitchen island, over the fridge, in a corner or even in the wall.

Within the wall.

wine column storage How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

Wine bottles are not the only factors you can store within a wall

into the walls storage wine How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

There holes had been really exposed throughout renovation and repurposed

corner breakfast wine storage How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

You can also come up with all kinds of types for wall-integrated wine racks

Carved-out spaces within the walls are superb for storage and display. So if you do not want to use counter space for the wine rack, an idea is to include it into the wall. It is not that hard to do this and it’s ingenious, uncommon and eye-catching.

Use the staircase wall.

understairs wine storage How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

In the situation of a suspended staircase, the room beneath is exceptional for storage

modern undestairs wine storage How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

You can integrate storage compartments within the staircase wall with out compromising its design and style

wine collection understairs How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

Another fantastic use of the wall room underneath the staircase

wine shelfs How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

If you’d rather not carve within the wall, you can mount shelves

The staircase wall actually presents you with an excellent storage possibility, not just for wine bottle but for all sorts of other items. You can design and style shelves and storage compartments and they wouldn’t consider up floor room at all. It will also be an interesting display for the area.

Within the kitchen island.

kitchen island storage wine books How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

An exceptional storage answer which also seems good

modern kitchen stainels hood How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

A big kitchen island provides adequate storage space to decide on from

wine storage and lighting How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

You can customize the kitchen island to incorporate wine storage

white modern kitchen splash green How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

Uncover the very best location for the wine cubbies once you figure out in which the plumbing is put in

modern kitchen island white How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

The room on the side of the island is also outstanding for storing wine bottles

The kitchen island is a superb storage spot. It typically comes with drawers, shelves and storage compartments. There is also the likelihood of such as a wine-storage system in the island. You can use the side of the kitchen island or you can just discover a room in amongst the drawers.

Image sources: one, two, three, 4, 5, 6, seven, eight, 9, 10, 11, twelve, 13, 14, 15, sixteen, 17 and 18.

« The Miami 60-Story Porsche Style Tower Featuring Three Automobile Elevators Published by Simona Ganea in How To, Tips, and Guidance, on January 20th, 2014 p                                                                                                                                                                                                                                                            How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

Posts related to How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area

3edcd  wall storage wine How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

10 Useful And Interesting-Searching Wall Mounted Wine Racks

664e2  vertical spice rack How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

Conserving Area Turns into All-natural With Vertical Storage

0dec7  vertical spice rack How You Can Incorporate Wine Racks Into Your Layout With Out Wasting Area other

Saving Room Gets All-natural With Vertical Storage

DG I by Camarim ArquitectosDaily Interior Design Ideas

DG I is a residential project completed by Camarim Arquitectos in 2014.

It is located in Lisbon, Portugal.

DG I by Camarim Arquitectos (1)DG I by Camarim Arquitectos (2)DG I by Camarim Arquitectos (3)DG I by Camarim Arquitectos (4)DG I by Camarim Arquitectos (5)DG I by Camarim Arquitectos (6)DG I by Camarim Arquitectos (7)DG I by Camarim Arquitectos (8)DG I by Camarim Arquitectos (9)DG I by Camarim Arquitectos (10)DG I by Camarim Arquitectos (11)DG I by Camarim Arquitectos (12)DG I by Camarim Arquitectos (13)

DG I by Camarim Arquitectos:

“Our client wanted to enlarge his 2-bedroomapartment and so he acquired 2 more apartments in the same building – one above and one on the side – with the aim of joining them as one with more generous and flexible social and intimates spaces. This project concerns the former.

The apartment on the upper floor had a livingroom with a smallbalcony and an attic-shaped larder without natural light or ventilation. A single door connected the attic to the living room and the small-size balcony window rendered the space gloomy and stuffy. The client wanted to convert this apartment to an en suite bedroom with hammam, living room and a small kitchen to allow him to rest, read or work without having to go to the main social space downstairs.

We widened the balcony window, opened a large skylight in the attic and tore down the wallbetween living room and attic: suddenly the gloomy apartment was flooded with light from dawn till sunset. We wanted the light from the balcony and the skylight to reach every space and so, instead of partitioning the en suite bedroom with corridors and doors, we arranged all spaces in a linear sequence, divided by filters adjusted to each condition: reflective glass, transparent glass, translucent curtains and black-out curtains. Each space has its own materiality: synthetic self-levelling floor in the living room, Vila Viçosa marble in the hammam and teak wood in the bedroom.

Natural and artificial light conditions, as well as the actual filters arrangement – open, closed or closed and overlaid – influencestheir appearance: at different moments the same space may be reflective and opaque or luminous and transparent, finite or blurred with adjacent spaces.”

DG I by Camarim Arquitectos (14)First Level DG I by Camarim Arquitectos (15) Second Level

Photos by: Nelson Garrido

CATEGORIES: Apartment • InteriorDesign

TAGS: Art • Bathroom • Bookshelf • Camarim Arquitectos • Contemporary Interior Design • Decorative Accessory • Dining Room • Glass Walls • Kitchen • Lisbon • Portugal • Staircase • Terrace • Wall Decor • Wood Floors

Nature-Inspired Beauty – How To Use River Stones In DIY TasksDaily Interior Design Ideas

River stones are so versatile and there are so several gorgeous issues you can do with them, from decorations to garden landscaping. What makes these stones so stunning is the reality that they are smooth and shaped by the water. Also, they have the best dimensions for a selection of beautiful projects. For example:

Succulent Planter.

c4e30  PicMonkey Collage3 Nature Inspired Beauty – How To Use River Stones In DIY Tasks other

Make a lovely succulent planter and carry spring into your property, even if the plants are not true. You will want faux succulent plants, a flower pot or bowl, paint and river stones. Have exciting with the task but bear in mind that simplicity is often much more potent than something.located on lizmarieblog.

Succulent table.

e8e5a  succuletn table Nature Inspired Beauty – How To Use River Stones In DIY Tasks other

Similarly, you can developed a succulent table. It would basically be a simple wooden table with a planter down the center. There you will be placing river stones and succulent plants. Use the table as an accent piece on the patio or in the backyard.

Placemats.

d1263  unique river stone placemats3 Nature Inspired Beauty – How To Use River Stones In DIY Tasks other

0fc71  unique river stone placemats Nature Inspired Beauty – How To Use River Stones In DIY Tasks other

2d4de  unique river stone placemats1 Nature Inspired Beauty – How To Use River Stones In DIY Tasks other

2d4de  unique river stone placemats2 Nature Inspired Beauty – How To Use River Stones In DIY Tasks other

Spruce up your dining space table with some distinctive river stone placemats. To make confident your table will not get scratched you need to use mesh on the back of the mats. You can combine various colors and sizes of river stones or go for a simple style.

d21b9  planter river stone1 Nature Inspired Beauty – How To Use River Stones In DIY Tasks other

Let’s get a closer seem at how you can make a river stone placemat. For this project you need to have shelf liner, decorative river rocks, adhesive and some spare time. Choose on the dimensions and minimize the shelf liner to size. Then start gluing the stones beginning from the middle.discovered on blissbloomblog.

Doormat.

b93f7  doormat from river stone Nature Inspired Beauty – How To Use River Stones In DIY Tasks other

And speaking of river stone mats, you can also make one particular for your entrance or for your bathroom. This time you will have to use bigger stones. Attach them to a straightforward mat with silicone. The holes on the back enable the water to drain.

Base floor lamp.

eab75  floor lam river stone Nature Inspired Beauty – How To Use River Stones In DIY Tasks other

One more interesting use for river stones would be a decorative piece, for example, a lamp. You can use the stones to make a lovely base for the lamp. Decide on the stones you want to use, ideally a big one to put on the bottom and smaller ones to stack after that. Drill a holes down their center and make the base as massive as you want.located on ashbeedesign.

River stone planter.

3d658  planter river stone Nature Inspired Beauty – How To Use River Stones In DIY Tasks other

Here’s how you can actually make a planter out of river stones. You’ll need a pot, a scorching glue gun and river stones. Starting up from the base of the pot, glue the stones one particular by one particular. It is a time consuming process and you have to quite much think of this as a puzzle.identified on internet site.

Pathway.

27515  pathway from river stone Nature Inspired Beauty – How To Use River Stones In DIY Tasks other

Of course, river rocks can also be utilized in landscaping. In the garden, you can use them in numerous approaches. For example, these river stones circles look really intriguing and they complement the fresh herbs and flowers beautifully. The stepping stones allow you explore the garden although also generating it search amazing.

Mirror update.

27515  mirror river stone update Nature Inspired Beauty – How To Use River Stones In DIY Tasks other

Inside the house, river stones can be helpful when you are attempting to give a piece a makeover. For illustration, get a appear at this mirror. It has a great wooden frame and river stones have been utilized to give it a unique and elegant appeal. The gravel fills in the holes.

Kitchen backsplash.

b33ba  kitchen river stone backsplash Nature Inspired Beauty – How To Use River Stones In DIY Tasks other

River stones also supply you an interesting alternative to the conventional backsplash. You can locate river stones that come in square tiles. They are not tough to install and not quite pricey both.found on homestoriesatoz.

Boots tray.

a3f66  Mudroom Boot tray Nature Inspired Beauty – How To Use River Stones In DIY Tasks other

Here’s a task that is exciting, fascinating and practical: a pebble boot tray. All you have to do is uncover a tray and throw some river stones or pebbles in it. Place it at the entrance, in the garage or in the mudroom.located on maillardvillemanor.

Knobs.

a3f66  rocks pull drawer Nature Inspired Beauty – How To Use River Stones In DIY Tasks other

Another trendy use for river stones can be seed here. These cabinet knobs are in fact rocks and they are hand made. So subsequent time you’re on getaway make sure you deliver back some souvenirs you can later on use in your DIY tasks.found on lilliedale.

« Silver Kitchens: Concepts &amp InspirationPublished by Simona Ganea in DIY, on April 22nd, 2014

DIY Clothes RackDaily Interior Design Ideas

Make your own clothing rack (abeautifulmess.com)Hi, ABM readers! It’s Rubyellen again, and I am here to share a truly simple clothes rack you can make to displaysome overflow or maybe some of your favourite pieces for the season. And when you don’t require it, it can simply be taken apart and stored away.

Make your own clothing rack (abeautifulmess.com) Make your own clothing rack (abeautifulmess.com) Supplies:
four three/eight” x 72″ poplar dowels
-one particular 7/8″ x 48″ poplar dowel
-measuring tape
-pencil
-drill
-7/8″ drill bit
-five/32″ drill bit
-two 23″ x .125″ leather cording
-two 50″ x .125″ leather cording
-wood glue (optional)

DIY clothing rack step 1Phase A single: Measure and mark 15 1/2″ down from the best of each of your 4 three/eight” x 72″ dowels. This mark will be the center of the hole. Utilizing the 7/8″ drill bit, drill a hole on each mark, all the way through the dowel. Make confident to hold your hole straight as you drill by way of if you drill via the dowel at an angle, your clothing bar will not be degree. Lightly sand the hole opening to eliminate any roughness.

DIY clothing rack step 2Stage Two: Measure and mark eight” up from the bottom of your 4 dowels, but you will want to make positive that this mark is 90 degrees from the top hole. Using the 5/32″ drill bit, drill a hole on each mark, all the way by means of the dowel, making certain to maintain your hole straight as you drill by means of. Lightly sand the hole opening to eliminate any roughness. Gather two dowels collectively to form one end of the rack, and insert the 23″ leather cording through the five/32″ holes then, knot the ends. Knotting helps stop the dowel legs from sliding open and falling flat on the floor. Repeat for the remaining 23″ cording and two dowels.

DIY clothing rack step3Step Three: Insert the seven/eight” x 48″ dowel by way of the leading holes of one particular side of the rack, enabling about 1 one/2″ to protrude from the end, and then insert the other finish via the other remaining pair of dowels, in the exact same way. Open the rack to the point in which the 23″ leather cording on the two sides is fully extended.

DIY clothing rack step 4Phase 4: Center the 50″ leather cording about in which the three dowels meet together, and wrap around twice diagonally, and then wrap about twice the opposite way diagonally, so that it creates an “X” of kinds. Double knot together the ends and bury the tails inside the cording. Repeat for the opposite side. You could do without having the leather cording and just use wood glue to secure the dowels together to stop the horizontal dowel from slipping out.

Make your own clothing rack (abeautifulmess.com) If you do with no the wood glue, it can make it a lot simpler to get the rack apart and retailer when you require it out of the way. You almost certainly won’t want to overload the rack, but I think if you need some additional room and want to show some of your preferred pieces, this is a very good option. For styling, I only put eight hangers with clothing on the rack, but it could take double that amount (maybe eventriple, dependent what it is you want to hang). I even did pull-ups on it to see if it would hold me, and it did (but I do not advocate using it as an working out device!). You can even hang on some of your purses and hats. And if you have small ones like me, you can drape material on it, and it gets theatre curtains and sets the stage spot for some minor performances. This easy dowel clothing rack can have a lot of employs. Satisfied crafting! xo. Rubyellen

Credits // Author and Photography by: Rubyellen Bratcher.

DIY Brass ChandelierDaily Interior Design Ideas

Do you say “Yes, please!” to modernbrasslightingfixtures that you can make yourself and customize to your own space? Or maybe you’re of the train of thought where DIY lighting fixtures seem overwhelming and intimidating and scary.

Either way, you may have seen the Lindsey Adelman brass chandelier that has graced cyberspace for a couple of years now, not only because it’s a beauty, but also because it comes in a DIY kit. Which is very convenient, although it’s not the route we took. Thisstep-by-step tutorial you’re reading right now aims to take you through the process of building the brass chandelier in as simple a way as possible, while keeping the entire process completely customized. Let’s dive in.

Note: Author is an experienced, although not professional, electrician. The chandelier-building process is explained as clearly and accurately as possible. Contact a professional with any questions or potential hazards you come across. Homedit is not responsible for any damage caused as a result of following this tutorial.

DIY Level: Intermediate to Advanced.

Materials Needed for Exact Lamp in Tutorial: (Note: Photo shown is a loose guide; use the text below for accurate materials list.) GrandBrass.com:

  • 1 x FI1/8PLUG (1/8 plug with screw driver slot)
  • 1 x RE1/8FX1/4MS (1/8f x 1/4m reducer w/ shoulder brass)
  • 2 x NI0-1/2X1/8 (1/2in x 1/8 ips nipple steel)
  • 2 x BOT2 (1/8f bottom x (2)1/8f top tapered brass cluster body)
  • 5 x CU578 (2-1/4in cup w/ 1/8sl hole brass raw)
  • 5 x SR0-3/8 (3/8in slip ring w/ side screw brass)
  • 5 x SO10045 (Edison porcelain keyless socket 660w-250v 1/8-27 cap)
  • 1 x NE449NP (nickel plated 1/8f thru x 5/8in straight coupling)
  • 3 x SV140 (1/8f x 1/8f ips adjustable friction swivel brass)
  • 1 x BOLG3 ((3)1/8f sides x 1/4f bottom x 1/8f top large cluster body unfinished brass)
  • 1 x PIBR07-0×8 (7in x 1/8 ips brass pipe stem)
  • 3 x PIBR06-0×8 (6in x 1/8 ips brass pipe stem)
  • 1 x PIBR05-0×8 (5in x 1/8 ips brass pipe stem)
  • 2 x PIBR04-0×8 (4in x 1/8 ips brass pipe stem)
  • 3 x PIBR03-0×8 (3in x 1/8 ips brass pipe stem)
  • Amazon.com: 1 x Leviton 128-I 15-Amp 660-Watt Twin Light-Socket Adapter – Ivory
  • Etsy.com (SnakeHeadVintage shop): 1 x Ceiling Canopy Wall Sconce Mount – Polished Satin Brass
  • Hardware Store:
  • 10’ x 18AWG whitewire
  • 10’ x 18 AWG black wire
  • 2 x wire nuts (medium-sized)
  • SuperBrightLEDs.com: 6 x E27-A19DF-WW4 Warm White bulbs

Step 1: Sketch or find a picture of what you want your final chandelier to look like. Consider your space – is it long and narrow (such as over a diningtable) or more square (such as in an entryway)? This tutorial shows a brass chandelier that fits into a space that is more square than long, so it has three primary branches. (Lindsey Adelman’s has two.)

Step 2: Loosely configure your chandelier. Using the sketch/photo as your guide, loosely begin to configure your chandelier without the wire. Have fun with this! The general ideas is: the porcelain socket goes inside the brass cup, the pipe screws into the socket, and the slip ring goes over the pipe next to the brass cup. (Note: The photo shown above is a two-branch beta version of the chandelier, not the final chandelier.)

Tip: Take detailed photos of your configuration as you go. You will disassemble this entire thing later, so you’ll want to use photos to guide you.

Step 3: Prepare the ceiling fixture. First, make sure to flip the breaker so the electrical is off, then remove old chandelier, if necessary, and make sure the ceiling mount is secure. We had to make a few trips to the attic to secure the mount better so the lamp would hang straight.

Step 4: Do a mock-up attachment of the chandelier to the ceiling. Make sure all systems are go with ceiling attachment and that you like the look and feel of your chandelier configuration in your space. (Note: Again, this is the beta version of our chandelier; although we liked the two-branch version, it simply wasn’t right for our space. Plus, it’s trickier to wire.)

Tip: Play with the angles of the branches.

Tip: Gently and slowly spin the chandelier to align it how you want it in your space.

Step 5: Remove chandelier from ceiling and make any configuration changes necessary. This step is optional. The photo above shows how part of our second branch was removed and attached to the central hub (large cluster body) to form a third branch. This created a more three-dimensional shape, which fit our square space.

Step 6: Disassemble main branches from central hub.

Step 7: Wire up one branch at a time.

Step 7a: Using wire cutters, carefully cut through wire casing (not the wire) about 1” from the end.

Step 7b: Pull the 1” section of wire casing off the wire.

Step 7c: Create a hook with the exposed wire and attach to the corresponding screw on the porcelain socket. Do this for both the black and white wires. (BLACK to GOLD, WHITE to SILVER.)

Step 7d: Working backwards, thread the wire through other elements on that branch.

Step 7e: Put everything together and tighten. This will be your final tightening, so make sure parts are straight and secure.

Tip: Take the “elbow” pieces (adjustable swivels) apart when wiring, then carefully reattch them when wires are in place, as shown in photos above and below.


Step 7f: When branch is completed to a junction or the central hub, cut wire while leaving about 3” sticking out.

Step 8: Wire up all branches this way up to the central hub.

Tip: If you followed this tutorial’s three-branch configuration, when you’re done wiring the branches, you should have five white and five black wires coming out of the central hub. (Note: Although there are six light bulbs, the twin light socket adapter is wired as though it were just one bulb.)

Step 9: Remove black wire casing ends and twist wires together. The goal here is to have all the branches’ black wires come together and connect to a single black wire to send up through the vertical pipe that connects to the ceiling wires (we’ll do the same for white wires later). So, cut the wires as short as you can safely manage, about 3” (because you’ll have to stuff them all into the central hub, so you don’t want any extra…but not too short, either!), then remove the individual wire casings and twist together. (Note: Push a black and white wire through the vertical ceiling-connecting pipe, then remove that single black wire casing end so you’re ready to attach it to the branches’ black wire cluster.)

Step 10a: Attach single black wire to cluster. Twist the single black wire into to the cluster of black wires from the branches. Then, using a wire nut, screw them all together securely.

Step 10b: Secure connection with electrical tape, then push black wires and wire nut into central hub. Be careful not to sharply bend/break the wires. This is tricky, take your time.

Tip: Because you will be screwing the vertical pipe section of the central hub onto the lower portion of the central hub, and because you don’t have one square millimeter to spare, take a moment here to counter-twist your vertical pipe. With the single black and white wires already coming through your vertical pipe, and the single black wire already connected, grasp the end of the single white wire and twist the vertical pipe section counter-clockwise (the direction you would use if you were unscrewing the hub). Your wires will twist here, which is what you want because when you screw the central hub back together, that will untwist the wires.

Step 10c: Attach white wire cluster with single white wire. Just like you did for the black wires, you’ll now remove white wire casings, twist ends together, attach wire nut, put on electrical tape, and carefully fit everything into central hub. Screw the hub together. (This is not easy, but it is doable.)

Step 11: Cover last hole on central hub. Using the reducer and plug pieces, cover up the last hole on your central hub.

Step 12: Find the ceiling canopy and slide it onto the vertical pipe.

Step 13: Screw vertical pipe into ceiling mount. Be careful to not let the branches hit your face as you screw the chandelier in! Take your time, use a second set of hands if necessary.

Step 14: Wire chandelier to existing light wiring in ceiling.

Step 15: Test it out. Flip the breaker switch to return power, then cross your fingers and turn on your chandelier. Hopefully it works like a charm! You’re so close to being done.

Step 16: Attach ceiling canopy. I’d recommend flipping the breaker switch to turn electrical off here, then attach the ceiling canopy before turning the electrical back on.

Step 17: Pat yourself on the back for a job well done. Enjoy your new chandelier and the many trips you’re about to make into your space just to admire it.

We hope you find this tutorial helpful and that you find success in creating your own beautiful brass chandelier!

« How You Can Dress Up Narrow Spaces Using Hallway RunnersPublished by Brittney Smart in DIY Projects, on September 5th, 2014