PVC Wall Planter DIYDaily Interior Design Ideas

00022  6a00d8358081ff69e201b7c6f098e8970b 800wi PVC Wall Planter DIY cute things Ideas for DIYs can come from a myriad of different sources: sometimes I make things I want but can’t afford, things I need but can’t find, or in this case, something I can afford and find but that happens to be sold out. Grrrrrr. I wanted to get these really interesting wall planters for the studio living room from West Elm, but they were sold out and therefore unavailable for my decorating purposes. The lack of ready-made wall planters sent me searching for a DIY way to get those green leafy guys up on the wall. So I made a few sketches and recruited Josh to implement the plan. -Laura

Hey guys, Josh here. Laura and I put our heads together for this one. We initially made the planters out of bent acrylic sheets (instead of PVC pipe). They looked awesome! But right when we were about to hang them, the acrylic started cracking open :/ So we had to rethink the material situation. This is what we came up with.

Supplies:
-8-10″ PVC pipe (length depends on how many planter you plan on making) Try going to to your local plumbing supply store and asking if they have a damage pile you can look through. I got our pipe for free! Never hurts to ask.
-wood board (width and length depends on the size of pipe and number of planters you make)
-wood and super glue
-saw tooth picture hanger(s)
-plants/planting soil/planter pebbles

Tools:
-jig saw
-straight edge
-Sharpie
-hand or miter saw
-drill
-clamp

00022  6a00d8358081ff69e201bb0795c5f9970d 800wi PVC Wall Planter DIY cute things 8dc3d  6a00d8358081ff69e201b8d07a9026970c 800wi PVC Wall Planter DIY cute things 8dc3d  6a00d8358081ff69e201bb0795c624970d 800wi PVC Wall Planter DIY cute things 8dc3d  6a00d8358081ff69e201b8d07a9067970c 800wi PVC Wall Planter DIY cute things Step One: This step basically involves making three cuts. Take your straight edge and Sharpie and make a line straight down the pipe lengthwise. Then do the same on the opposite side (the first cut is cutting the pipe in half lengthwise). Depending on the size of pipe, you may not have to cut all the way through, just cut enough for your planter size. The planters we made are about 8.5″ high (I used an 8″ pipe).

After I cut the pipe in half, I made a cross cut. I had to drill a hole so I could get the jig saw blade started. To make the line for the second cut was a two person job. I measured up 8.5″, then slowly rotated the pipe while Laura held a Sharpie against the pipe, making a line around the circumference. If you don’t have a helping hand, you could clamp the Sharpie onto a table (facing out) and rotate the pipe against it. Or maybe there’s an even easier way that we didn’t think of…

After I had all the halfsies cut out, I spray painted them white to prime them.

7551a  6a00d8358081ff69e201b7c6f0f53e970b 800wi PVC Wall Planter DIY cute things d6677  6a00d8358081ff69e201bb07961f3f970d 800wi PVC Wall Planter DIY cute things d6677  6a00d8358081ff69e201b7c6f0f471970b 800wi PVC Wall Planter DIY cute things d6677  6a00d8358081ff69e201bb07961f78970d 800wi PVC Wall Planter DIY cute things b040a  6a00d8358081ff69e201bb07961f84970d 800wi PVC Wall Planter DIY cute things Step Two: This step only requires a couple of cuts! The base is comprised of two pieces of wood. I made the back piece 10″ x 12″ and the bottom piece 10″ x 5″. These measurements make the edge stick out about an 1″. You can make it any size your heart desires. After I had the two pieces cut and attached to each other, I traced the centered half pipe, then applied the super glue to the edges and pressed it against the two surfaces. I clamped the half pipe down. Be careful not to clamp too hard, or it will push the edges of the pipe out, and it’ll be all distorted and wonky and dumb looking. After the glue dried, we painted each planter and installed the hangers on the back. Then it was time to plant!

Note: As an afterthought, I decided to round the bottom ledge so it matched the curve of the half pipe. I did it with a jig saw, and it was a bit of a hassle since it was already attached. You may just want to leave the bottom square, but if you do want it curved, then cut it before you attach to the back!

b040a  6a00d8358081ff69e201bb07961fdd970d 800wi PVC Wall Planter DIY cute things cfb3f  6a00d8358081ff69e201bb079620c8970d 800wi PVC Wall Planter DIY cute things Laura picked out the plants because she’s good at that stuff. She chose plants that would hang over the edge as well as went with the colors we painted the planters. When you are choosing your plants, take into account the amount of light that will be in your space. Different plants require different amounts of light. The little tag on the plant usually indicates the amount of light the plant needs. The planters aren’t very big, so take the size into account as well when you go plant shopping. When we planted, I put in a couple of inches of pebbles for drainage, then transplanted the little guys into their new homes.

cfb3f  6a00d8358081ff69e201b8d07aed20970c 800wi PVC Wall Planter DIY cute things 15053  6a00d8358081ff69e201b8d07aed71970c 800wi PVC Wall Planter DIY cute things 15053  6a00d8358081ff69e201b7c6f0f696970b 800wi PVC Wall Planter DIY cute things f4d02  6a00d8358081ff69e201bb07962187970d 800wi PVC Wall Planter DIY cute things f4d02  6a00d8358081ff69e201bb079621b8970d 800wi PVC Wall Planter DIY cute things That’s it! We hung the plants in the the office living room. The hardest part of this project is remembering to water icon smile PVC Wall Planter DIY cute things – Josh

Author: Joshua Rhodes. Photos by Laura Gummerman and Sarah Rhodes. Photoedited with ABeautifulMess actions.

Ideas for DIYs can come from a myriad of different sources: sometimes I make things I want but can’t afford, things I need but can’t find, or in this case, something I can afford and find but that happens to be sold out. Grrrrrr. I wanted to get these really interesting wall planters for the studio living room from West Elm, but they were sold out and therefore unavailable for my decorating purposes. The lack of ready-made wall planters sent me searching for a DIY way to get those green leafy guys up on the wall. So I made a few sketches and recruited Josh to implement the plan. -Laura

Hey guys, Josh here. Laura and I put our heads together for this one. We initially made the planters out of bent acrylic sheets (instead of PVC pipe). They looked awesome! But right when we were about to hang them, the acrylic started cracking open :/ So we had to rethink the material situation. This is what we came up with.

Supplies:
-8-10″ PVC pipe (length depends on how many planter you plan on making) Try going to to your local plumbing supply store and asking if they have a damage pile you can look through. I got our pipe for free! Never hurts to ask.
-wood board (width and length depends on the size of pipe and number of planters you make)
-wood and super glue
-saw tooth picture hanger(s)
-plants/planting soil/planter pebbles

Tools:
-jig saw
-straight edge
-Sharpie
-hand or miter saw
-drill
-clamp

Step One: This step basically involves making three cuts. Take your straight edge and Sharpie and make a line straight down the pipe lengthwise. Then do the same on the opposite side (the first cut is cutting the pipe in half lengthwise). Depending on the size of pipe, you may not have to cut all the way through, just cut enough for your planter size. The planters we made are about 8.5″ high (I used an 8″ pipe).

After I cut the pipe in half, I made a cross cut. I had to drill a hole so I could get the jig saw blade started. To make the line for the second cut was a two person job. I measured up 8.5″, then slowly rotated the pipe while Laura held a Sharpie against the pipe, making a line around the circumference. If you don’t have a helping hand, you could clamp the Sharpie onto a table (facing out) and rotate the pipe against it. Or maybe there’s an even easier way that we didn’t think of…

After I had all the halfsies cut out, I spray painted them white to prime them.

Step Two: This step only requires a couple of cuts! The base is comprised of two pieces of wood. I made the back piece 10″ x 12″ and the bottom piece 10″ x 5″. These measurements make the edge stick out about an 1″. You can make it any size your heart desires. After I had the two pieces cut and attached to each other, I traced the centered half pipe, then applied the super glue to the edges and pressed it against the two surfaces. I clamped the half pipe down. Be careful not to clamp too hard, or it will push the edges of the pipe out, and it’ll be all distorted and wonky and dumb looking. After the glue dried, we painted each planter and installed the hangers on the back. Then it was time to plant!

Note: As an afterthought, I decided to round the bottom ledge so it matched the curve of the half pipe. I did it with a jig saw, and it was a bit of a hassle since it was already attached. You may just want to leave the bottom square, but if you do want it curved, then cut it before you attach to the back!

Laura picked out the plants because she’s good at that stuff. She chose plants that would hang over the edge as well as went with the colors we painted the planters. When you are choosing your plants, take into account the amount of light that will be in your space. Different plants require different amounts of light. The little tag on the plant usually indicates the amount of light the plant needs. The planters aren’t very big, so take the size into account as well when you go plant shopping. When we planted, I put in a couple of inches of pebbles for drainage, then transplanted the little guys into their new homes.

That’s it! We hung the plants in the the office living room. The hardest part of this project is remembering to water icon smile PVC Wall Planter DIY cute things – Josh

Author: Joshua Rhodes. Photos by Laura Gummerman and Sarah Rhodes.Photoedited with ABeautifulMess actions.

Leave a Reply

Your email address will not be published. Required fields are marked *