DIY Facade Wire HangerDaily Interior Design Ideas

Running out of dresser storagespace or looking for an alternative way to store and display accessories? Thislittlewire hanger not only adds charm to a room, it is perfect for holding light weight extras that you may want to keep in easy reach. Perfect for scarves in an adult room, or for those cute little baby clothes you might want to show off in a nursery. Get creative and match your facade to your space! Try small flowers for a feminine touch or go modern with small boxes. The sky is the limit with what you chose to make!

DIY wire hanger facade

Wire Hanger Supplies:

  • small gauge copper grounding wire (approximately 8 ft)
  • large wire cutters
  • vice
  • large pliers
  • spraypaint
  • break line bender (optional for circular curves)

1. Start by straightening out the wire (it usually comes in a spool) by putting the wire out of the spool, attempting to make as straight as possible with your hands, and then feeding through a vice grip, clamping any of the curves as you feed it through

DIY wire door hanger instructions

2. Once the wire is straight, start using your pliers to make bends. Start first with an over the door bend (or you can create a small loop at the beginning if you choose not to use this over the door and want to hang directly on the wall instead.

wire door hanger DIY

3. Carefully map out your facade and make 90 or 45 degree bends with the pliers as necessary. It may help to draw out your facade on a large piece of craft paper and follow the bends that way.

4. If you have any curves in the facade (like a “tree”), you can use a break line bender (typically used as an automotive tool) to create a nice rounded curve without dents or odd angles. If you have more angular bends like this mountain or house the pliers are best for bending.

5. Once the facade is finished, bend up again and over to create the other side that will go over the door (or end with a small loop that could fit over a nail if you decide to keep it flat and hang it on the wall). Cut off any excess.

wire door hanger DIY tutorial

6. Lastly spray a nice evencoat of spray paint (if desired) to your finished product. Let it dry completely and you are finished!

Place over a door and hang light weight items like scarves, belts, or other accessories. This facade is perfect for a baby’s room to hold swaddling blankets, hooded towels, or those cute onesies.

DIY wire hanging facade

DIY wire over the door hanger

Helpful notes:

1. Cooper and aluminum tend to be pretty malleable so they would work well for this project. The smaller gauge you go on the wire the less likely it is to hold weight (although the easier it is to bend for the project). If you plan to hold heavy items use a larger gauge wire. If you are just using merely for the facade a smaller gauge wire is perfect and easier to work with.

2. If you plan to use this as a door hanger, keep in mind that the wire over the door may impact your door clearance. Make sure that your door would support this in the existing space (particularly closer to the hinges) beforecreating the door hanging part of the project. You may want to alter this and create two small loops at each end of the facade and hang it on nails on the wall instead if the clearance is an issue.

« Floor To Ceiling Windows: A New Way To Define Your HomePublished by Chelsea Mohrman in DIY Projects, on September 19th, 2014

Leave a Reply

Your email address will not be published. Required fields are marked *